Renewable energy and cutting carbon emissions now top the global environmental agenda. This programme addresses the fundamentals of renewable energy and shows how solar, wind and other such energy sources can be efficiently integrated into practical power systems.
You’ll study core power engineering topics such as power electronic converters, machines and control alongside modules specific to renewable energy sources, on topics like power system modelling, analysis and power converters.
At the same time, you’ll study a unique set of modules on the efficient generation of electricity from solar and wind power, as well as integrating renewable generators into micro-grids, with stability analysis and active power management. Power electronics design is covered in depth, including conventional and emerging converter topologies and advances in semiconductor power devices.
You’ll be prepared to meet the renewable energy challenges of the 21st century in a wide range of careers.
School of Electronic and Electrical Engineering
Our School is an exciting and stimulating environment where you’ll learn from leading researchers in specialist facilities. These include our Keysight Technologies wireless communications lab, as well as labs for embedded systems, power electronics and drives.
Depending on your choice of research project, you may also have access to our labs in ultrasound and bioelectronics or our Terahertz photonics lab, class 100 semiconductor cleanroom, traffic generators and analysers, FPGA development tools, sensor network test beds. We have facilities for electron-beam lithography and ceramic circuit fabrication – and a III-V semiconductor molecular beam epitaxy facility.
Core modules that run throughout the year will allow you to take part in different lab-based projects and explore different forms of renewable energy as well as how they can be integrated into electricity systems. You’ll also consider how renewable source-powered generations can be integrated into the grid and analysis and design of control systems.
To build your understanding of the global electronics industry, you’ll also complete a dissertation. This could take the form of a business, manufacturing or outsourcing plan, a proposal for research funding or an essay on a specific aspect of the industry.
You’ll complete your studies with three optional modules, selecting one from each of three pairs that cover different topics. If you have no experience of c-programming you’ll take a module that develops those skills, or another focusing on software development. You’ll choose between Power Electronics and Drives and Electric Drives and take another module from Energy Management and Conservation and Energy in Buildings.
Over the summer months you’ll also work on your research project. This gives you the chance to work as an integral part of one of our active research groups, focusing on a specialist topic in power electronics, power engineering and control and selecting the appropriate research methods.
Want to find out more about your modules?
Take a look at the Electrical Engineering and Renewable Energy Systems module descriptions for more detail on what you will study.
These are typical modules/components studied and may change from time to time. Read more in our Terms and conditions.
- Industry Dissertation 15 credits
- Mini Projects and Laboratory 15 credits
- Smart Grid Analysis 15 credits
- Power Electronics and Drives 15 credits
- Electric Power Generation by Renewable Sources 15 credits
- Control Systems Design 15 credits
- Main Project 45 credits
- Energy Management and Conservation 15 credits
- Micro- and Nano-Electromechanical Systems 15 credits
- Electric Power Generation and Distribution 15 credits
- Programming 15 credits
Learning and teaching
Our groundbreaking research feeds directly into teaching, and you’ll have regular contact with staff who are at the forefront of their disciplines. You’ll have regular contact with them through lectures, seminars, tutorials, small group work and project meetings. Independent study is also important to the programme, as you develop your problem-solving and research skills as well as your subject knowledge.
You’ll be assessed using a range of techniques including case studies, technical reports, presentations, in-class tests, assignments and exams. Optional modules may also use alternative assessment methods.
Entry requirements, fees and applying
A bachelor degree with a 2:1 (hons) in electronic or electrical engineering, mechatronics or physics. Applicants with a 2.2 will be considered if they can demonstrate specific competence in power electronics, electrical machines or drives.
All applicants will need to have GCSE English Language at grade C or above, or an appropriate English language qualification.
We accept a range of international equivalent qualifications.
English language requirementsIELTS 6.5 overall, with no less than 6.0 in any component.. For other English qualifications, read English language equivalent qualifications.
Improve your English
If English is not your first language, you may be able to take a pre-sessional course before you begin your studies. This can help if you:
- don't meet the English language requirements for your course or
- want to improve your understanding of academic language and practices in your area of study.
Our pre-sessional courses are designed with a progression route to the degree programme and are tailored to the subject area. For information and entry requirements, read Language for Engineering (6 weeks) and Language for Science: Engineering (10 weeks).
How to apply
UK/EU applicants 10 September 2018
International applicants 31 July 2018
Applications submitted after this deadline may be considered on a case by case basis at the discretion of the school, please check before applying.
This link takes you to information on applying for taught programmes and to the University's online application system.
If you're unsure about the application process, contact the admissions team for help.
Read about visas, immigration and other information in International students. We recommend that international students apply as early as possible to ensure that they have time to apply for their visa.
UK/EU: £10,250 (total)
International: £21,500 (total)
Read more about paying fees and charges.
For fees information for international taught postgraduate students, read Masters fees.
Additional cost information
There may be additional costs related to your course or programme of study, or related to being a student at the University of Leeds. Read more about additional costs
Scholarships and financial support
The School of Electronic and Electrical Engineering offer a range of scholarships for UK, EU and International students. Find out more about our Scholarships.
Renewable energy and efficient power conversion systems are of immense importance worldwide and graduates of this course can expect to find jobs in a wide variety of industries including the electronics, automotive, transport, construction, industrial automation, power utility, energy, oil and environmental sectors.
You’ll be well-placed to develop practical solutions to the problem of integrating renewable energy systems into established electricity distribution networks. You should be able to contribute to strategic planning, systems implementation and operation of sustainable power generation systems.
This programme is also excellent preparation for PhD study.
You’ll have access to the wide range of engineering and computing careers resources held by our Employability team in our dedicated Employability Suite. You’ll have the chance to attend industry presentations book appointments with qualified careers consultants and take part in employability workshops. Our annual Engineering and Computing Careers Fairs provide further opportunities to explore your career options with some of the UK’s leading employers.
The University's Careers Centre also provide a range of help and advice to help you plan your career and make well-informed decisions along the way, even after you graduate. Find out more at the Careers website.
The research project is one of the most satisfying elements of this course. It allows you to apply what you’ve learned to a piece of research focusing on a real-world problem, and it can be used to explore and develop your specific interests.
Recent projects by students on this programme have included:
• Power Flow Control of a Distribution Network using FACTS Devices
• Module Integrated Converters for Photovoltaic Energy Systems
• Modelling and Control of Parallel Connected Inverters
• Power Regulation in the Power System using an Energy Storage Device
• Application of Current Source Converters to Power Flow Control in a Power System
• Control of a Renewable Energy System based Microgrid having an Energy Storage System as Backup
• Control of a Grid Connected Wind Energy System under Abnormal Operating Conditions
• DC-AC Inverter for grid-side connection of an induction generator
• Modelling and control of a DC motor simulating a wind turbine
A proportion of projects are formally linked to industry, and can include spending time at the collaborator’s site over the summer.