Electronic and electrical engineering principles lie at the heart of some of the world’s biggest industries. Combining core topics across electronic engineering with a variety of specialist modules, this course will equip you with the knowledge and skills to work in a wide range of electronics careers.
You’ll develop your knowledge of the mathematical and scientific principles that underpin electronic and electrical engineering, as well as key topics like circuit design and communications networks. Specialist modules will allow you to build on this foundation in areas like power electronics, energy conversion, control circuits and electric drives.
Taught by expert researchers, you’ll learn in world-class facilities and undertake project work in every year of the course to gain the knowledge and professional skills to succeed in fields from hybrid vehicles to electrical power generation and distribution.
You can choose to take either the four-year Integrated Masters (MEng, BEng) or the three-year Bachelor’s (BEng) degree on this course.
Find out more about the MEng, BEng and BEng
You’ll have access to world-class facilities, including the ARM Embedded Systems Laboratory and the Keysight Technologies Wireless Communications Laboratory, which features professional-standard equipment including arbitrary function generators and 100MHz 4-channel oscilloscopes.
For your final-year project, you could also have access to facilities such as our bionanoelectronics research laboratory, terahertz imaging laboratory, or ABB robotic arm laboratory.
Accreditation is the assurance that a university course meets the quality standards established by the profession for which it prepares its students. An accredited electronic engineering course must meet the quality standards set by the IET.
The MEng, BEng course is accredited as fully satisfying the educational base for a Chartered Engineer (CEng). Once you have graduated with your MEng degree, you will usually be required to have a minimum of three years industrial experience before you can apply for your chartered status.The BEng is accredited as partially satisfying the educational base for CEng status. A programme of accredited further learning will be required to complete the educational base for CEng.
All of our core electronic and electrical degree courses have a common first two years. This lays the foundations of your studies and gives you a thorough understanding of key topics, but it also means you can easily change between these courses until the end of Year 2.
You’ll learn about the physical principles that affect the function of electronic components and electrical systems, as well as circuit theory, analysis and design. You’ll also study communications systems and networks, power electronics and modules designed to improve your mathematical skills for engineering.
In Year 3 you’ll take more specialised modules that focus on topics such as embedded systems and integrated circuit design – and you’ll have the chance to choose a module in either digital communications or radio frequency and microwave design.
If you choose to continue to Year 4 for the MEng qualification, you’ll have a wider variety of choice in topics such as medical electronics, using renewable sources to generate electric power and wireless communications systems. You’ll also undertake a substantial research project to apply what you’ve learned, and complete a dissertation on an aspect of the electronics industry to help prepare you for professional life.
Every year of the course gives you hands-on experience of project work. This gives you the opportunity to explore your subject further as well as developing valuable skills in problem solving, communication and teamwork.Find out more about our Projects
These are typical modules/components studied and may change from time to time. Read more in our Terms and conditions.
- Circuit Analysis and Design 20 credits
- Circuit Theory 10 credits
- Communications Networks and Signals 10 credits
- Communications Systems 10 credits
- Digital Electronics and Microcontrollers 20 credits
- Further Engineering Mathematics 10 credits
- Physical Electronics 1 10 credits
- Physical Electronics 2 10 credits
- Introduction to Engineering Mathematics (Compulsory for students without A-level Mathematics) 20 credits
- Engineering Mathematics (Requires A-level Mathematics) 10 credits
- Algorithms and Numerical Mathematics (Requires A-level Mathematics) 10 credits
- Electronic Circuit Design 10 credits
- High Frequency Electronics 10 credits
- Transistors and Optoelectronic Devices 20 credits
- Communications Theory 20 credits
- Power Electronics 10 credits
- Control Systems 10 credits
- Embedded Systems Project 20 credits
- Mobile Applications Project 20 credits
- Professional Studies 10 credits
- Integrated Circuit Design 10 credits
- Electric Drive Systems 10 credits
- Electric Power Systems 10 credits
- Embedded Systems 20 credits
- Group Design Project 50 credits
- RF and Microwave Engineering 10 credits
- Digital Communications 10 credits
- Industry Dissertation 15 credits
- MEng Individual Project 45 credits
- Next Generation Silicon Technologies 15 credits
- Wireless Communications Systems Design 15 credits
- Data Communications and Network Security 15 credits
- Micro- and Nano-Electromechanical Systems 15 credits
- Power Electronics and Drives 15 credits
- Electric Power Generation by Renewable Sources 15 credits
- FPGA Design for System-on-Chip 15 credits
- Control Systems Design 15 credits
- Medical Electronics and E-Health 15 credits
Broadening your academic horizons
At Leeds we want you to benefit from the depth and breadth of the University's expertise, to prepare you for success in an ever-changing and challenging world. On this course you broaden your learning through core and/or optional modules. Find out more on the Broadening webpages.
Learning and teaching
You’ll benefit from our integrated style of learning and teaching. Laboratory classes, project work, and industrial visits allow you to gain first-hand experience investigating and applying material from your lectures and tutorials to real life work situations. Together they will equip you with in-depth knowledge and key practical skills that will put you in a good position to compete in science and technology-related careers. Our close links with industry also mean that you have direct contact with industry and potential employers from an early stage in your course.
Our personal tutorial system will provide academic and pastoral support. You will have a designated personal tutor throughout your studies at Leeds. He or she will be an academic member of staff: you will have weekly academic tutorials with your tutor throughout your first year, in your tutor group (of typically 5 students), as well as one-to-one meetings twice per semester.
In addition, our excellent student support team is based close to where you’ll work and study to help with anything from academic advice to timetabling and project submission enquiries.
Most modules are assessed by more than one component. These components can include written examinations held at the end of each year, in-class and online tests, example sheets, assignments, and coursework in the form of reports, projects, presentations and posters.
Entry requirements, fees and applying
A-level: AAA including Mathematics (excluding General Studies and Critical Thinking).
GCSE: English Language at grade C or above, or an appropriate English language qualification.
Access to HE Diploma
Pass 60 credits overall with 45 credits at Level 3, 30 credits with Distinction (including Mathematics) and the remaining 15 credits with Merit or above.
D*DD, including a D in Further Mathematics plus interview and diagnostic maths test.
D3, D3, D3 including Mathematics.
35 overall (18 higher including 5 points at higher level in Mathematics)
Irish Highers (Leaving Certificate)
A1A1A2A2A2A2, including Mathematics and English.
Scottish Highers / Advanced Highers
AAAAA overall (AAA at advanced level including Mathematics) including Mathematics and English at Intermediate level.
Engineering Diploma: A (plus A-level Mathematics at grade A or above).
Read more about UK and Republic of Ireland accepted qualifications or contact the Schools Undergraduate Admissions Team.
Were committed to identifying the best possible applicants, regardless of personal circumstances or background.
Access to Leeds is an alternative admissions scheme which accepts applications from individuals who might be from low income households, in the first generation of their immediate family to apply to higher education, or have had their studies disrupted.
Find out more about Access to Leeds and alternative admissions.
We accept a range of international equivalent qualifications.
English language requirementsIELTS 6.0 overall, with no less than 5.5 in any component. For other English qualifications, read English language equivalent qualifications.
International students who do not meet the English language requirements for the programme may be able to study an English for Academic Purposes pre-sessional course with a progression route to the degree programme. For information and entry requirements, read Pre-sessional programmes.
How to apply
Apply to this course through UCAS. The institution code for the University of Leeds is L23. Check the deadline for applications on the UCAS website.
International students apply through UCAS in the same way as UK/EU students. Our network of international representatives can help you with your application. If youre unsure about the application process, contact the admissions team for help.
Read about visas, immigration and other information in International students. We recommend that international students apply as early as possible to ensure that they have time to apply for their visa.
Suitable applicants will be invited to an applicant day, which gives you the opportunity to meet our students, academic staff and admissions staff, and find out more about your course. You’ll take part in a hands-on electronic demonstration, a question and answer session and a school tour. The tour of the school’s facilities includes interactive demonstrations of student activities and recent project work.
We like to interview applicants before making an offer, so the applicant day will also include an interview with one of our academics. This will give you the chance to discuss your application in more detail, check that it’s the right course for you and your career plans, have your questions answered and find out more about studying at Leeds.
Fees are published in the September before the year of entry. They will be updated here after this date.
If you take a study abroad or work placement year, youll pay a reduced tuition fee during this period. For more information, see Study abroad and work placement tuition fees and loans.
Read more about paying fees and charges.
The School of Electronic and Electrical Engineering offer a range of scholarships for Home, EU and International students.
Find out more about our Scholarships
All of our degrees will equip you with the skills you need to succeed in industry, including design, problem solving, numeracy and analysis skills, together with ‘transferable skills’, such as communication and working as a team. Because of the nature of the electronics industry, the demand for high calibre electronic engineering graduates is high and wide-ranging employment opportunities exist both in large multinational corporations and small start-up companies working on next-generation products and technologies.
Graduates have gone on to roles as software, electrical, project and instrument engineers among a host of other roles. They’ve established careers at organisations like BAE Systems, BP, Filtronic, Intel Technology Malaysia, Motorola, Mott MacDonald, Omron Electronics, Siemens, Signalling Solutions Limited, Simulations Systems Ltd., Tata Steel Europe and Transport for London.
Read our alumni profiles to find out more about where our students are working
You’ll have access to our dedicated Employability team, located centrally in our Employability Suite, who will provide you with specialist face-to-face support and advice to help you find relevant work experience, internships and year-in-industry placements, as well as graduate positions.
You’ll benefit from timetabled employability sessions, ongoing support during internships and placements, and presentations and workshops delivered by employers. The team also works closely with the University’s Careers Centre, which is one of the largest in the country.
Find out more about careers support and employability
Study abroad and work placements
If you choose to take the MEng course, you can apply to spend your third year studying at a university overseas. We’ll advise you on finding a university of your choice, which will need to offer similar modules to the ones you would study in Leeds, and the Programme Leader will approve appropriate matches.
Find out more about Study abroad
With the help and support of our faculty Employability Team, you can choose to undertake a placement at one of the 100+ companies that we work with. If you decide to undertake a placement year, this will extend your degree by 12 months and on successful completion, you will be awarded the ‘industrial’ variant in your degree title to demonstrate your unique expertise to future employers.
Find out more about work placements