Nuclear power is a major component of the energy supply mix of many industrialised nations. Concerns over climate change have prompted a major resurgence of interest in nuclear power in the UK and elsewhere, meaning that the current shortage of skilled engineers capable of designing, building, operating and decommissioning such facilities is likely to grow in the future.
To help meet this demand, this course will give you specialist knowledge in various aspects of nuclear energy, so that after graduation you can expect to pursue an exciting and highly rewarding career in the industry. Taught by experts in the field, you’ll also gain a broad knowledge of key topics across the field of chemical engineering, such as thermodynamics and materials science, to complement your specialist skills.
You can choose to take either the four-year Integrated Masters (MEng, BEng) or the three-year Bachelor’s (BEng) degree on this course.
Find out more about the MEng, BEng and BEng.
Our labs are equipped with the latest technology for environmental monitoring and pollution control, advanced energy systems such as fuel cells, scanning electron microscopes, X-ray diffractometers, chemical processing unit operations and petroleum reservoir and rock deformation facilities.
Accreditation is the assurance that a university course meets the quality standards established by the profession for which it prepares its students. An accredited chemical engineering course must meet the quality standards set by the Institution of Chemical Engineers (IChemE).
The MEng, BEng course is accredited as fully satisfying the educational base for a Chartered Engineer (CEng). Once you have graduated with your MEng degree, you will usually be required to have a minimum of three years industrial experience before you can apply for your chartered status.
The BEng is accredited as partially satisfying the educational base for CEng status. A programme of accredited further learning will be required to complete the educational base for CEng.
The first two years of our chemical engineering degrees share the same set of modules, focusing on the fundamental science and engineering concepts associated with the subject. Not only does this give you a firm foundation for your studies, but it also means you can switch easily between our courses if you choose.
You’ll cover topics such as mass and energy balances, thermodynamics, fluid mechanics, materials science and process modeling, as well as having plenty of opportunities to put that knowledge into practice in design and laboratory work.
Year 3 gives you the opportunity to build on this foundation. You’ll develop a more advanced knowledge of key chemical engineering topics such as reaction engineering and separation processes, alongside a specialised module in nuclear science and engineering, from the principles of fission and fusion to reactor decommissioning and the treatment of nuclear waste.
If you continue to Year 4 for the MEng qualification, you’ll take Masters-level modules informed by the research interests of staff in the School. You’ll develop skills in designing new chemical products and manufacturing challenges and study reaction engineering in greater depth.
Every year of the course gives you hands-on experience of project work. This gives you the opportunity to explore your subject further as well as developing valuable skills in problem solving, communication and teamwork.
Find out more about our Projects.
You’ll study engineering ethics as part of your course, with lectures and/or seminars in each year of your study. Visit our engineering ethics webpage to find out more.
The list shown below represents typical modules/components studied and may change from time to time. Read more in our Terms and conditions.
- Technical Skills and Applications 20 credits
- Introduction to Process Engineering 30 credits
- Engineering Science 1 30 credits
- Mathematical Techniques 1 10 credits
- Materials Science and Engineering 20 credits
- Introduction to Petroleum Engineering 10 credits
- Foundation Mathematics 10 credits
- Fundamentals of Process Chemistry 10 credits
- Foundation Engineering Physics 10 credits
- Topics in Nanotechnology 10 credits
- Introduction to Management 10 credits
- Mathematical Techniques 2 20 credits
- Safety, Health and Environment 20 credits
- Process Systems and Applications 20 credits
- Engineering Science 2 30 credits
- Chemical Thermodynamics 10 credits
- Materials Synthesis and Characterisation 20 credits
- Design Project (BEng) 40 credits
- Process Engineering Operations 20 credits
- Separation Processes 20 credits
- Reaction Engineering 20 credits
- Nuclear Operations 20 credits
- Research Project (MEng) 45 credits
- Chemical Products Design and Development 15 credits
- Advanced Reaction Engineering 15 credits
- Nuclear Engineering and the Nuclear Industry 30 credits
- Nuclear Futures 15 credits
Broadening your academic horizons
At Leeds we want you to benefit from the depth and breadth of the University's expertise, to prepare you for success in an ever-changing and challenging world. On this course you broaden your learning through core and/or optional modules. Find out more on the Broadening webpages.
Learning and teaching
You’ll benefit from our integrated style of learning and teaching. Laboratory classes, project work, and industrial visits allow you to gain first-hand experience investigating and applying material from your lectures and tutorials to real life work situations. Together they will equip you with in-depth knowledge and key practical skills that will put you in a good position to compete in science and technology-related careers. Our close links with industry also mean that you have direct contact with industry and potential employers from an early stage in your course.
You will have a designated personal tutor throughout your studies at Leeds, who will be an academic member of staff. You will have fortnightly academic tutorials with your tutor throughout your first two years, in your tutor group (of typically 5 students), as well as one-to-one meetings twice per semester. In addition, our excellent student support team is based close to where you’ll work and study to help with anything from academic advice to timetabling and project submission enquiries.
Most modules are assessed by more than one component. These components can include written examinations held at the end of each year, in-class and online tests, example sheets, assignments, and coursework in the form of reports, projects, presentations and posters.
Entry requirements, fees and applying
A-level: AAA including Mathematics and Physics or Chemistry.
Where an A-Level Science subject is taken, we require a pass in the practical science element, alongside the achievement of the A-Level at the stated grade.
Excludes A-Level General Studies or Critical Thinking.
Extended Project Qualification - Whilst we recognise the value, effort and enthusiasm applicants make in the Extended Project, we do not currently include this as part of our offer making. We do however encourage you to provide further information on your project in your personal statement and if invited, at interview.
GCSE: English Language at grade C (4) or above, or an appropriate English language qualification.
Access to HE Diploma
Pass 60 credits overall with 45 credits at Level 3, with Distinction - to include Mathematics, Calculus and Further Calculus and specific subjects e.g. Physics or Chemistry.
D*DD with Distinctions in relevant Mathematics and Chemistry or Physics units. Some Mathematics and Chemistry or Physics units may be optional on your BTEC but are required by the Faculty. Please contact us for further information.
Please note - there may be different requirements for the new RQF BTEC’s, please contact Admissions.
D3, D3, D3 including Mathematics and either Physics or Chemistry.
35 points overall, with 18 points at higher level to include 5 points in Mathematics and either Physics or Chemistry.
Irish Highers (Leaving Certificate)
H1 H2 H2 H2 H2 H2 including Mathematics and either Physics or Chemistry.
Scottish Highers / Advanced Highers
AA at Advanced Higher level, including Mathematics and either Physics or Chemistry, and AABBB at Higher level.
Advanced Diploma: A with an appropriate amount of Mathematics and either Chemistry or Physics.
Read more about UK and Republic of Ireland accepted qualifications or contact the Schools Undergraduate Admissions Team.
Were committed to identifying the best possible applicants, regardless of personal circumstances or background.
Access to Leeds is an alternative admissions scheme which accepts applications from individuals who might be from low income households, in the first generation of their immediate family to apply to higher education, or have had their studies disrupted.
Find out more about Access to Leeds and alternative admissions.
If you do not have the formal qualifications for immediate entry to one of our degrees, you may be able to progress through a foundation year. We offer a Studies in Science with Foundation Year BSc for students without a science background at A-level and an Interdisciplinary Science with Foundation Year BSc for applicants who meet specific widening participation criteria.
English language requirementsIELTS 6.0 overall, with no less than 5.5 in each section.. For other English qualifications, read English language equivalent qualifications.
How to apply
Apply to this course through UCAS. The institution code for the University of Leeds is L23. Check the deadline for applications on the UCAS website.
International students apply through UCAS in the same way as UK/EU students. Our network of international representatives can help you with your application. If you’re unsure about the application process, contact the admissions team for help.
Read about visas, immigration and other information in International students. We recommend that international students apply as early as possible to ensure that they have time to apply for their visa.
Academic Technology Approval Scheme (ATAS)
The UK Government’s Foreign and Commonwealth Office (FCO) operates a scheme called the Academic Technology Approval Scheme (ATAS). If you are an international (non-EU/EEA or Swiss citizen) applicant and require a student visa to study in the UK then you will need an ATAS certificate to study the four-year MEng, BEng course at the University of Leeds.
To apply for an ATAS certificate online, you will need your programme details and the relevant Common Aggregation Hierarchy (CAH) code and descriptor. For this course, the CAH code is: CAH10-01-09 and the descriptor is: Chemical, Process and Energy Engineering.
More information and details on how to apply for your ATAS certificate can be found at https://www.gov.uk/guidance/academic-technology-approval-scheme.
Suitable applicants will be invited to an applicant day, for which we strongly encourage attendance, as this gives you the opportunity to meet our students, academic and admissions staff, and find out more about your course. You’ll take part in a practical engineering activity, followed by a School and campus tour. The tour of the School’s facilities includes interactive demonstrations of student activities.
During the day you’ll have a discussion with an academic member of staff, to check that it’s the right course for you and your career plans, have your questions answered and find out more about studying at Leeds.
After you apply we will send you a link to book your place on the applicant day, but please let us know as soon as possible if you cannot attend, so your place can be allocated to another applicant.
UK/EU: See fees section below
International: £23,750 (per year)
Tuition fees for 2019 entry
For UK and non-UK EU full-time students starting in 2019, the fee for 2019/20 will be £9,250.
The fee may increase in future years of your course in line with inflation, and as permitted by law. For example, the increase of 2.8% in 2017/18 was based on the government’s forecast for the RPI-X measure of inflation.
The UK government has confirmed that non-UK EU students starting in the 2019/20 academic year will have home fee status and be eligible for UK government student loans for the duration of their course. The UK government has not confirmed the situation for future years, so keep checking our website for updates.
Visit our Brexit page for the latest information on the effect of the UK's exit from the EU on current students and applicants to the University.
Tuition fees for a study abroad or work placement year
If you take a study abroad or work placement year, you’ll pay a reduced tuition fee during this period. For more information, see Study abroad and work placement tuition fees and loans.
Read more about paying fees and charges.
Visit our Brexit page for the latest information on the effect of the UK's exit from the EU on current students and applicants to the University.
If you have the talent and drive, we want you to be able to study with us, whatever your financial circumstances. There is help for students in the form of loans and non-repayable grants from the University and from the government. Find out more in our Undergraduate funding overview.
Scholarships are available for 2020 entry.
Careers in the field of Chemical Engineering are wide-ranging, and employment prospects are excellent.
96% of our recent graduates are employed or in further study within six months of graduating (latest Destinations of Leavers from Higher Education survey 2016/17). Graduates have secured positions including:
Technical Support Engineer, Baker Hughes
Drilling Engineer, BP
Graduate Project Engineer, Centrica
Graduate Engineer, Reckitt Benckiser Products
Nuclear Process Engineer, Sellafield Ltd
Oil and Gas Production Technologist, Shell
Process Project Engineering, Unilever
Read our alumni profiles to find out more about where our students are working.
You’ll have access to our dedicated Employability team, located centrally in our Employability Suite, who will provide you with specialist face-to-face support and advice to help you find relevant work experience, internships and year-in-industry placements, as well as graduate positions.
You’ll benefit from timetabled employability sessions, ongoing support during internships and placements, and presentations and workshops delivered by employers. The team also works closely with the University’s Careers Centre, which is one of the largest in the country.
Find out more about careers support and employability.
Study abroad and work placements
On this course you have the opportunity to apply to spend time abroad, usually as an extra academic year. We have over 300 University partners worldwide and popular destinations for our students include Europe, the USA, Canada, Australia, New Zealand, Singapore, Hong Kong, South Africa and Latin America.
Find out more at the Study Abroad website.
With the help and support of our faculty Employability Team, you can choose to undertake an industrial placement year at one of the 100+ companies that we work with. If you decide to undertake a placement year this will extend your period of study by 12 months and, on successful completion, you will be awarded the ‘industrial’ variant in your degree title to demonstrate your added experience to future employers.
Find out more about work placements.